This is a Buddha vinyl cut decal. Fine zen with this awesome sticker matte black

Description

This is a Buddha vinyl cut decal. Fine zen with this awesome sticker matte black.
The actual measurements of the sticker are approximately 5.25X 7 in.
If you would like a color other than the matte black shown please send a message with your purchase specifying the specific color or I will send you the matte black. You can see the list of colors I have in the picture area. The colors shown are for glossy only. I have matte for black and white only.
On the sticker everything white  behind the art represents the backing of the sticker or what it would look like on a white background. These are die cut.  The sticker designs are brought courtesy of Cut Ready Clip art, or my own personal designs, or a little of both. I cut the decals myself from Oracle vinyl, which is of intermediate grade quality; it will last quite awhile outdoors and very longindoors. Please check out the specs from Oracle’s site for specifics on the material.  Please read or watch atutorialonline to learn how to apply a vinyl sticker. I will apply the application tape for you so it will come on top of the sticker and looks like masking tape. You can use soap and water toapply it, forinstance on a window, or for regular dry application
Equipment Needed
A credit card or a vinylsqueegee, and application tape.
How to apply sticker:
The idea is the tape applied to the top of the sticker will hold everything in place while you safely pull off the backing of the sticker.
If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape.
Paulie4000
Steps:
1. Apply pressure over the whole sticker top(the application tape side of sticker) with the credit card or squeegee. Flip over. the application tape will be on the bottome and the stickers backing on top.
2. Pull off the backing of the sticker. This is the waxy piece( not the masking tape colored application tape) of paper underneath your sticker. Be careful after you pull off the backing, the sticker will stick to anything like crazy.
3. Line up sticker properly; place one side down, then slowly credit or squeegee from left toright until the whole sticker is down. Go over the whole sticker pushing out any air bubbles or parts that are not all the way down.
4. Carefully and slowly pull off application tape making sure all sticker parts are staying on the medium you are applying the sticker to. If something not sticking (which is rare, usually only for real small pieces) go back and reapply with squeegee or credit card directly on part not sticking and then try again, repeat until stuck down.
5. Go over the whole sticker lightly with squeegee or credit card.
For wet application
1.Spray the surface that you want the sticker to be approximately, with soap and water.
2. Place sticker over the sprayed area and slide around until in correct spot, do this quickly, it will start to stick. Once the sticker is where you want it…
3. With squeegee, or credit card, start pushing and pulling the water out from under the sticker with the edge of the card or squeegee, keep doing this tell no bubbles and almost all the water is out.
4. Carefully pull application tape off, making sure it isn’t taking off any of the sticker.
5. Wipe down with soft cloth and let dry.
Congratulations on applying your sticker!
If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape.
Paulie4000